Epoxy Putty-a material for simple jigs DIY

Epoxy Putty- a material for simple jigs DIY

 

1. Immerse the material in the engine oil, all must be covered before removing
2. Seize the time and cut out the space to be taken by fingers
3. Mix plastic steel clay A+B, 1:1, you can choose 5 minutes, 90 minutes according to your needs, this time use 5 minutes
4. Knead A and B evenly and repeat for about 1-2 minutes
5. Take appropriate size bakelite as the base, arrange the appearance and fix it on a flat surface
6. Take out the material soaked in engine oil, and press it into the plastic steel soil that has not been hardened
7. For screen printing, the surface needs to be leveled, and it can be inverted on the desktop in addition to pushing it flat by hand
8. Seize the time and cut out the space to be taken by fingers
9. Clean the surface of greasy dirt and soil
10. Repeated picking and placing of materials, confirming the stability and picking, you are done

Specifications